| Frequency
Range |
High Power
136-174MHz
400-470MHz
450-520MHz |
Standard
66-88MHz
136-174MHz
216-266MHz
400-470MHz
450-530MHz |
| Frequency
Stability |
+/-1.5ppm Above
100MHz
+/-2.5ppm Below 100MHz |
|
| Channel
Capacity |
TM8110: 10
channels (simplex or semi duplex)
TM8115: 100 channels (simplex or semi duplex) |
|
| Power Supply |
10.8-16VDC |
|
| Channel
Spacing |
12.5/20/25kHz |
|
| Channel
Increment |
7.5/12.5/15/20/25/30kHz |
|
| Dimensions (LxWxH) |
High Power
195 x 160 x 51 mm
7.7 x 6.3 x 2.0 in |
Standard
175 x 160 x 50 mm
6.9 x 6.3 x 2.0 in |
| Weight |
High Power
1.6kg (58oz) |
Standard
1.4kg (51oz) |
| Operational Temperature |
-30°C to +60°C (-22°F to +140°F) |
|
| RF Connector |
50 Ohm BNC/mini UHF |
|
| Interface
Connectors |
3
Interface Connectors with Serial Ports |
| Military
Standards 810 F* |
| Applicable
MIL-STD |
Method |
Procedure |
| Low Pressure |
500.4 |
2 |
| High
Temperature |
501.4 |
1 & 2 |
| Low
Temperature |
502.4 |
1 & 2 |
| Temperature
Shock |
503.4 |
1 |
| Solar
Radiation |
505.4 |
1 |
| Rain |
506.4 |
3 |
| Humidity |
507.4 |
1 |
| Salt Fog |
509.4 |
1 |
| Dust |
510.4 |
1 |
| Vibration |
514.4 |
1 |
| Shock |
516.5 |
1 & 5 |
| * Also meets
equivalent MIL-STD C, D & E standards |
|
|
Transmitter
|
|
|
| Output Power |
25W
Model: 25W, 10W, 5W, 1W |
| Modulation
Limiting |
+/-2.5kHz 12.5kHz
+/-4kHz 20kHz
+/-5kHz 25kHz |
|
| FM Hum and
Noise |
-38dB 12.5kHz
-41dB 20kHz
-43dB 25kHz |
|
|
Conducted/Radiated Emissions |
-36dBm to 1GHz
-30dBm above 1GHz |
|
| Audio
Response |
300Hz-3kHz
Flat or pre-emphasised |
|
| Audio
Distortion |
3% at 1
kHz 60% modulation (typical) |
| Transmit
Rise Time |
10ms |
|
| Duty Cycle |
33% at 25W |
|
Receiver
|
|
|
| Sensitivity |
0.28µV
for 12dB SINAD (<-118dBm) |
|
Intermodulation |
75dB |
|
| Selectivity |
65dB 12.5kHz
70dB 20kHz
75dB 25kHz |
|
| Spurious
Responses |
72dB |
|
| Hum and
Noise |
-40dB 12.5kHz
-41dB 20kHz
-43dB 25kHz |
|
| Audio
Response |
300Hz-3kHz
Flat or de-emphasised |
|
| Audio
Distortion |
3% at
1kHz 60% modulation (typical) |