Induction Loops and Hearing Assistance....
HOW IT WORKS..
Induction loops for the hard of hearing are now becoming mandatory in many public buildings. Apart from serving as a means of communication, they also support the emergency evacuation protocol of the venue. What is an induction loop?. Not all hearing-aid users know the answer. So, the following explanation may be of some help to understand how a induction loop system works.
Most hearing-aids nowadays have a switch marked M and T. Some even have M,MT,T. The M (microphone) position is for "normal" listening, that is, receiving sound via the microphone built into the hearing-aid. The T position is for receiving the sound via an induction coil which is built into the hearing-aid. For the induction coil to provide sound, a magnetic field is set up by a loop of wire around the area concerned powered from a special loop driver amplifier. In recent years induction loop systems have begun to be provided in public places such as churches, cinemas, theatres, offices, reception desks, lecture, theatres, conference rooms, and even in the home, where the T facility is used to listen inductively. The MT position which is provided on some hearing-aids allows listening simultaneously to both airborne sound via the microphone and inductively transmitted sound via the induction loop system.
Places of Worship
Village Halls
Banks and Building societies
Council buildings and Town halls
Hospitals
Libraries
Theatres
Cinemas
Schools and Universities
Shops and Shopping Centres
Wrekin Communications are specialists in providing all types of communication requirements and have been established for over 20 years. From small portable units, domestic single room installations for improving TV or Audio appreciation, to public buildings and large establishments. Our specialist knowledge with help solve your requirements and ensure you comply with the Disability Discrimination Act 1995 (c. 50) , ISBN 0 10 545095 2.
