Auto diallers can be incorporated into many types of operation.   They can be configured to dial a mobile voice phone or landline (PSTN) and relay a message to anywhere in the world.    Simple operation is triggered by either opening or closing any of the 3 input contacts.

  • Fully automatic in operation
  • Alerts sent to up to 4 telephone numbers
    • Land-Line Telephone PSTN
    • Mobile Phones up to 4
    • All Cellular  networks  supported
    • Pre programmed with your messages and numbers ready to plug and go.

    Please note

    • This Autodialer requires a dedicated direct outside PSTN line to operate.

Features ....

  • Power fail battery back-up for 24 hours option
  • Voice indication of up to 3 types of alarm
  • Will call up to 4 individual numbers in programmed sequence
  • Ability to differentiate between urgent and status messages
  • Integration to remote radio signalling (see telemetry page)
  • Special units built to your requirements
  • 240 or 110 volt operation
  • Visual LED indication of AC power and DC power supplies
  • Fully BT approved for connection to the PSTN

Our  Autodialers are pre-programmed with your messages and numbers and are plug and go solutions. Full instructions supplied.

Applications ......

  • Remote Site monitoring with external or indoor PIR detectors
  • Machine monitoring, plant breakdown
  • Lone worker alarms with additional options    See Lone Worker page
  • Remote alarm sensors
Range Guide

Please visit the shop for latest prices
Autodialer BT approved with 240 volt PSU in case with 3 available contacts either N/O or N/C. One main message 8 seconds. 3 Additional contact related messages of 3 seconds each.
Pre-Programmed Ready to plug and go
Autodialer As above. With optional Flexilink Radio Receiver for use with lone worker devices installed.    Can also take a combination of radio and traditional hard wired sensors.
Pre-Programmed with your numbers and messages.  Ready to plug and go
Standby Battery option 24 hour with float charge for up to 24hr standby operation
  
Standard Autodialer with capacity for up to 4 numbers
3 individual trigger input to be either N/O OR N/C
1 standard VOICE message of 8 seconds
3 VOICE messages for identifying each input of 3 seconds each
(PSU not included) Requires external power 12Volts
Operating manual included
Lone worker Options * Licence exempt MPT1309

Please go to our "Lone-Worker" page for full details

SEE MAXON SL55 Maxon SL55 OPTIONS
Remote Sensors

ALL PRICES NOW SHOWN IN OUR SHOP. CLICK HERE TO VISIT
Radio operated outdoor PIR
  • Integral long life battery operated transmitter
  • 3 different beam patterns available .....
    • 12Mtr 90' beam PIR
    • 30 Mtr x 4Mtr narrow corridor
    • 10 Mtr x 110' horizontal beam (Anti pet)
    • Easily re-sited for rapid deployment
  • Fully self contained pre-coded plug and go solution......
Automatic Lone Worker unit C/W with  single panic button and automatic tilt and pre-alarm bleeper

 Lone worker page
Automatic Lone Worker unit C/W with  single panic button and automatic TILT  and MOVEMENT sensors with pre-alarm sounder and locator bleeper

 Lone worker page
Neck Pendant unit with single panic button

Lone worker Page
External Dipole antenna C/W Bracket & 5 Mtrs cable

Lone worker Page
 Last modified: June 10, 2010.